Protect it Clean and Protect Roofs 5lt

Protect it Clean and Protect Roofs 5lt


Protect it Clean and Protect Roofs 5lt

1 in stock



About Clean & Protect Roofs

Clean & Protect Roofs is a professional grade algae, mould, lichen remover and a surface sealer in one. Professional formula designed to cleanse heavy surface contamination along with providing a breathable protective seal on roof surfaces.

How To Use

Heavy Deposits of growth (moss) should be removed by brushing before application. Do not apply in damp/wet conditions or if rain is expected within 12 hours of application. The product is ready to use-do not dilute.

  1. Apply a generous, even coat.
  2. Ensure saturation of contaminants and substrate.
  3. Apply a second coat before the first coat dries (within 20 minutes)
  4. Leave the product to do the work.
    – On light contaminated roofs a visible difference can be seen within 7 days.
    – On heavily contaminated roofs it can take up to 8 months to see results.
    Clean & Protect Roofs will continue to work for up to 5 years.

CURING: Water repellence is evident after initial curing but repellency will increase to 100% efficiency over 14 days.

COVERAGE:  4 to 6m² per litre depending on porosity of surface.

Key features of Clean & Protect Roofs


  • Cleans & Protects – 2 in 1 application.
  • Removes lichen, mould & algae.
  • Repels dirt, grime & algae growth.
  • Allows the surface to breathe.
  • Essential roof cleaner & sealer.
  • Suitable for slate & tiled roofs.
  • 1 Application – up to 5 Years Protection!


There are no reviews yet.

Be the first to review “Protect it Clean and Protect Roofs 5lt”

Your email address will not be published. Required fields are marked *